The Soil Health Index (SHI) uses three core parameters—soil temperature, humidity, and EC—as its main inputs to comprehensively assess the overall suitability of soil for crop root growth, outputting a score from 0 to 100, and summing the scores to evaluate the overall health of the soil .
Reasons for Factor Selection
The SHI does not directly weight the three measurements. Instead, it first maps temperature, humidity, and EC each to a "suitability score" of 0–100 using a piecewise linear scoring function, and then sums them according to their weights. All three factors exhibit bidirectional stress characteristics. 1. Temperature: Too low (roots freeze, microbial activity is suppressed) and too high (root respiration is blocked, transpiration and water loss are aggravated) are both unfavorable; only the intermediate temperature zone is the most suitable. 2. Humidity: Both excessive dryness (drought stress) and excessive moisture (waterlogging, lack of oxygen, root suffocation) are detrimental; 3. EC: Too low indicates a lack of ionic nutrients and poor soil quality; too high indicates salt stress. The manual also clearly states that when soil volumetric moisture content is below approximately 20%, EC readings cannot accurately reflect the true salinity level; therefore, EC must be assessed in conjunction with humidity.
| Health Level Classification | ||||
| SHI score | Level code | Chinese | English | Meaning |
| 80.0–100.0 | 4 | excellent | Excellent | Temperature, humidity, and salinity are all within the optimal range, suitable for normal growth. |
| 60.0–79.9 | 3 | good | Good | Some factors were slightly biased, with no obvious stress. |
| 40.0–59.9 | 2 | generally | Fair | Mild stress exists; attention should be paid to irrigation/fertilization. |
| 20.0–39.9 | 1 | Poor | Poor | Multifactorial stress requires immediate intervention. |
| 0.0–19.9 | 0 | Difference | Bad | Root growth is inhibited in extreme environments. |
Feature 1
ABS engineering plastic, epoxy resin, waterproof grade IP68, can be buried in water and soil for long-term dynamic testing.
Austenitic 316 stainless steel, anti-rust, anti-electrolysis, fully sealed, resistant to acid and alkali corrosion.
Feature 2
1. Support GATEWAY and Collector with solar panels.
Feature 3
Probe length can be customized
Feature 4
Logo can be customized
Feature 5
Dual-Interface Readout
Type 1: RS485&APP 2 in 1 type, One sensor. Two interfaces. Two ways to read. Model: HD-S9IN1RA-01 RS485 for host systems; Type-C for direct mobile app readings.
Type 2: Only APP type,Show the 9 readings. Add soil health index(SHI). Model: HD-S9IN1A-01
Type 3: Only RS485 type, support MODBUS protocol. Model: HD-S9IN1R-01
Support multiple wireless output methods GPRS/4G/WIFI/LORA/LORAWAN Support server and software, real-time data viewing
Widely applied in smart agriculture, greenhouses, orchards, soil health assessment, environmental monitoring and ecological restoration, turf and landscape management, scientific research, smart irrigation, and more.
| Product Name | 9 in 1 Soil moisture temperature EC PH salinity NPK and SHI(soil health index) sensor |
| Probe type | Probe electrode |
| Measurement parameters | Soil Temperature Moisture EC PH Salinity N, P, K, SHI(soil health index) |
| Soil moisture measure range | 0 ~ 100%(V/V) |
| Soil temperature range | -40~80℃ |
| Soil EC measure range | 0~20000us/cm |
| Soil Salinity measure range | 0~1000ppm |
| Soil NPK measure range | 0~1999mg/kg |
| Soil PH measure range | 3-9ph |
| Soil SHI measure range | 0~100.0 |
| Soil moisture accuracy | 2% within 0-50%, 3% within 53-100% |
| Soil temperature accuracy | ±0.5℃(25℃) |
| Soil EC accuracy | ±3% in the range of 0-10000us/cm; ±5% in the range of 10000-20000us/cm |
| Soil salinity accuracy | ±3% in the range of 0-5000ppm; ±5% in the range of 5000-10000ppm |
| Soil NPK accuracy | ±2%FS |
| Soil PH accuracy | ±0.3ph |
| Soil moisture resolution | 0.1% |
| Soil temperature resolution | 0.1℃ |
| Soil EC resolution | 10us/cm |
| Soil salinity resolution | 1ppm |
| Soil NPK resolution | 1 mg/kg(mg/L) |
| Soil PH resolution | 0.1ph |
| Soil SHI resolution | 0.1 |
| Output signal | A:RS485 (standard Modbus-RTU protocol, device default address: 01) |
|
Output signal with wireless |
A:LORA/LORAWAN |
| B:GPRS | |
| C:WIFI | |
| D:4G | |
| Cloud Server and software | Can supply the matched server and software to see real time data in PC or mobile |
| Supply voltage | 5-30VDC |
| Working temperature range | -40 ° C ~ 80 ° C |
| Stabilization time | 1 Minute after power on |
| Sealing material | ABS engineering plastic, epoxy resin |
| Waterproof grade | IP68 |
| Cable specification | Standard 2 meters (can be customized for other cable lengths, upto 1200 meters) |
Q: What's the main characteristics of this soil 9 IN 1 sensor?
A: It is small size and high precision, it can measure the soil moisture and temperature and EC and PH and salinity and NPK and Health Index 9 parameters at the same time. It is good sealing with IP68 waterproof, can totally burried in the soil for the 7/24 continuous monitoring.
Q: What key issues does the 9-in-1 soil sensor address?
A: Knowing only eight individual soil parameters is not enough to determine the overall health of the soil. Our solution provides a comprehensive "health check-up" for your soil, generating an overall health score that enables targeted interventions to resolve soil health issues.
Q: Could I get samples?
A: Yes,we have materials in stock to help you to get the samples as soon as we can.
Q: What’s the common power supply and signal output?
A: 5 ~30V DC.
Q: What is the interface type for the 9-in-1 soil sensor?
A: Type 1: RS485&APP 2 in 1 type, One sensor. Two interfaces. Two ways to read. Model: HD-S9IN1RA-01
Type 2: Only APP type,Show the 9 readings. Add soil health index(SHI). Model: HD-S9IN1A-01
Type 3: Only RS485 type, support MODBUS protocol. Model: HD-S9IN1R-01
Q: How can I collect data?
A: You can use your own data logger or wireless transmission module if you have , we supply the RS485-Mudbus communication protocol.We can also supply the matched data logger or screen type or LORA/LORANWAN/GPRS/4G wireless transmission module if you need.
Q: Can you supply the server and software to see the real time data remotely?
A: Yes, we can supply the matched server and software to see or download the data from your PC or Mobile.
Q: What's the standard cable length?
A: Its standard length is 2 meters. But it can be customized, MAX can be 1200 meters.
Q: What's the lifetime of this Sensor?
A: At least 3 years or more.
Q: May I know your warranty?
A: Yes, usually it’s 1 year.
Q: What's the delivery time?
A: Usually, the goods will be delivery in 1-3 working days after receiving your payment. But it depends on your quantity.