PRODUCT INTRODUCTION:
Wind sensors are standardized instruments for measuring horizontal wind speed and direction data, available in L/H/S models.
This series of wind sensors is developed for marine applications, featuring a large measuring range, high accuracy, and corrosion resistance. It consists of a tail fin, propeller, nose cone, wind speed shaft, mounting column, and other internal parts. It uses AAS plastic material resistant to UV radiation and oxidation, preventing plasticization or yellowing. The products boast high performance quality and excellent consistency.
MEASUREMENT PRINCIPLE:
The magnetic is actuated rotating by the propeller,and then the hall switch sensor is drive by the magnetic to generate a square wave signal. The frequency of the square wave is linearly related to the wind speed.Three complete square waves is generated when the propeller rotate one cycle. Therefore, the wind speed data calculated based on the square wave frequency is stable and accurate.
The direction of the vane of the wind sensor indicates the wind direction. The angle sensor is drive to rotate by the vane, and the feedback voltage output by the angle sensor accurately outputs wind direction data.
1. Large measuring range, high precision
2. Corrosion resistant
3. AAS plastic material: resistant to UV rays andoxidation, preventing plasticization and yellowing
4. Optional wireless data collector GPRS/4G/WIFI/LORA/LORAWAN
5.Send matched cloud server and software
The matched cloud server and software can be supply if using our wireless module.
It has basic three functions:
5.1 See real time data in the PC end
5.2 Download the history data in excel type
5.3 Set alarm for each parameters which can send the alarm information to your email when the measured data are out range.
They are widely used in marine environmental monitoring, traffic meteorological monitoring, agricultural, forestry, and animal husbandry meteorological monitoring, polar meteorological monitoring, photovoltaic environmental monitoring, and wind power meteorological monitoring.
| Measurement parameters | |||
| Parameters name | Wind speed and direction sensor | ||
| Parameters | Measure range | Resolution | Accurancy |
| Wind speed | 0-60m/s
0-70m/s 0-100m/s |
0.1m/s | (0-20m/s)±0.3m/s or ±3% |
| Wind direction | 0~360° | 1° | 0-60m/s: ±5°
0-70m/s, 0-100m/s: ±3°
|
| Technical parameter | |||
| Wind speed starting value | 0-60m/s:<1m/s
0-70m/s, 0-100m/s: ≤0.5m/s |
||
| Wind direction starting value | 0-60m/s: 1m/s
0-70m/s, 0-100m/s: ≤0.5m/s |
||
| Wind direction corresponding angle | <±10° | ||
| Axis | 0-60m/s: Carbon fiber | 0-70m/s, 0-100m/s: Stainless steel | |
| Material quality | 0-60m/s, 0-70m/s: AAS | 0-100m/s: PC | |
| Environmental indicators | 0-60m/s, 0-70m/s: -55~55℃ | 0-100m/s: -55~70℃ | |
| Size Parameter | Height 445mm, length 570mm, weight 1.2kg | ||
| Output signal | The standard product is RS485 interface and NMEA protocol | ||
| Heating function | DC 24V, heating power 36W (heating function needs to be customized) | ||
| Customizable features | Analog signal
NMEA protocol ASCll (ASCll compatible with Vaisala) CAN interface (ASCl) RS232interface SDl-12 ModbusRTU |
||
| Power supply | DC 9-24V | ||
| Fixed method | The standard product is a sleeve type clamp locking. | ||
| Protection level | IP66 | ||
| Others | The outer diameter of the propeller is 180mm, and the tuming radius of the tail wing is 381mm; tall wing Height 350mm;Wind speed coefficient: 0.098m's comesponds to 1Hz; The lfespan of the wind direction sensor is 50 milion revolutions. |
||
| Authentication | Callbration certificate: Wind speed and direction;
ClA report: Low temperature storage, high temperature storagelow temperature CCS certification. |
||
| Application scenarios | Marine environmental monitoring, traffic meteorological monitoring, agriculture, forestry, animal husbandry and sideline meteorological monitoring, polar meteorological monitoring, photovoltaic environmental monitoring, wind power meteorological monitoring and other fields | ||
| Wireless transmission | |||
| Wireless transmission | LORA / LORAWAN(868MHZ,915MHZ,434MHZ), GPRS, 4G,WIFI | ||
| Mounting Accessories | |||
| Stand pole | 1.5 meters, 2 meters ,3 meters higth, the other higth can be customize | ||
| Equiment case | Stainless steel waterproof | ||
| Ground cage | Can supply the matched ground cage to burried in the ground | ||
| Cross arm for the install | Optional(Used in thunderstorm places) | ||
| LED display screen | Optional | ||
| 7 inch touch screen | Optional | ||
| Surveillance cameras | Optional | ||
| Solar power system | |||
| Solar panels | Power can be customized | ||
| Solar Controller | Can provide matched controller | ||
| Mounting brackets | Can provide the matched bracket | ||
Q: How can I get the quotation?
A: You can send the inquiry on Alibaba or the below contact information, you will get the reply at once.
Q: What are the features of this sensor?
A: Its features include small size, large measuring range, light weight, high precision, and corrosion resistance. It consists of a tail fin, propeller, nose cone, wind speed axis mounting column, and junction box.
The use of UV- and oxidation-resistant AAS plastic material ensures that the sensor will not plasticize or yellow over a long period of time.
It is easy for installation and can measure the wind speed at 7/24 continuous monitoring.
Q: Can we choose other desired sensors?
A: Yes, we can supply the ODM and OEM service, the other required sensors can be intergrated in our present weather station.
Q: Could I get samples?
A: Yes,we have materials in stock to help you to get the samples as soon as we can.
Q: Do you supply install accessory?
A: Yes, we can supply the matched install plate.
Q: What’s the common power supply and signal output?
A: Common power supply is DC 9-24V and signal output RS485.The other demand can be custom made.
Q: How can I collect data?
A: You can use your own data logger or wireless transmission module if you have , we supply the RS485-Mudbus communication protocol.We can also supply the matched LORA/LORANWAN/GPRS/4G wireless transmission module.
Q: What’s the standard cable length?
A: Its standard length is 2 m. But it can be customized, MAX can be 1KM.
Q: May I know your warranty?
A: Yes, usually it’s 1 year.
Q: What’s the delivery time?
A: Usually, the goods will be delivery in 3-5 working days after receiving your payment. But it depends on your quantity.