Multi Parameter Aquaculture Water Tester Dissolved Oxygen ORP Ph Turbidity Ec Meter Corrosion Resistance Titanium Alloy Sensor

Short Description:

The online multi-parameter water quality sensor adopts an all-in-one structure design. Each single-parameter sensor is an RS485 digital probe and is water tightly connected to the mother body. The optional parameters support up to 6 probes connected to one mother body and detect 7 parameters. The sensor comes with a cleaning brush, which can effectively clean the measuring end face, scrape off bubbles, and prevent microbial attachment. It can calmly cope with the monitoring needs of various water environment conditions such as sewage treatment, surface water, ocean and groundwater.

Send email to us Download

Product Detail

Product Tags

Product Vedio

Product introduce

Product Features

1. Fully digital sensor, RS485 output, standard MODBUS protocol;

2. All calibration parameters are stored in the sensor, and each probe is equipped with a waterproof connector for easy plug-in and replacement;

3. Equipped with an automatic cleaning device, it can effectively clean the measuring end face, scrape bubbles, prevent microbial attachment, and reduce maintenance;

4. Dissolved oxygen, conductivity (salinity), turbidity, pH, ORP, chlorophyll, blue-green algae and oil in water sensors can be freely matched;

5. All-in-one structural design, six probes can be connected at the same time to measure seven parameters;

6. Efficient acquisition algorithm, whole machine response time ≤30s, abnormal shutdown of the mother integrated voltage, abnormal communication alarm, abnormal cleaning brush alarm, convenient operation and maintenance judgment.

Product Applications

It can easily cope with various water environment monitoring needs such as sewage treatment, surface water, ocean and ground water.

Product Parameters

Measurement parameters
Product name	Fully digital titanium alloy multi-parameter water quality sensor
Multi-parameter matrix	Supports up to 6 sensors, 1 central cleaning brush. The probe and cleaning brush can be removed and freely combined.
Dimensions	Φ81mm *476mm
Operating temperature	0~50℃ (no freezing)
Calibration data	Calibration data is stored in the probe, and the probe can be removed for direct calibration
Output	One RS485 output, MODBUS protocol
Whether to support automatic cleaning brush	Yes/standard
Cleaning brush control	The default cleaning time is 30 minutes, and the cleaning time interval can be set.
Power supply requirements	Whole machine: DC 12~24V, ≥1A; Single probe: 9~24V, ≥1A
Protection level	IP68
Material	POM, anti-fouling copper sheet
Status alarm	Internal power supply abnormality alarm, internal communication abnormality alarm, cleaning brush abnormality alarm
Cable length	With waterproof connector, 10 meters (default), customizable
Protective cover	Standard multi-parameter protective cover
Wireless transmission
Wireless transmission	LORA / LORAWAN(EU868MHZ,915MHZ), GPRS, 4G,WIFI
Provide cloud server and software
Software	1. The real time data can be seen in the software .2. The alarm can be set according to your requirement. 3. The data can be download from the software.

Product name	Single parameter sensor technical parameters
Dissolved oxygen sensor	Interface	With waterproof connector
	Principle	Fluorescence method
	Range	0-20mg/L or 0-200% saturation
	Accuracy	±1% or ±0.3mg/L (whichever is greater)
	Resolution	0.01mg/L
	Material	Titanium alloy + POM
	Output	RS485 output, MODBUS protocol
Conductivity (salinity) sensors	Interface	With waterproof connector
	Principle	Four electrodes
	Conductivity range	0.01~5mS/cm or 0.01~100mS/cm
	Conductivity accuracy	<1% or 0.01mS/cm (whichever is greater)
	Salinity range	0~2.5ppt or 0~80ppt
	Salinity accuracy	±0.05ppt or ±1ppt
	Material	Titanium alloy + PEEK electrode head + nickel alloy electrode needle
	Output	RS485 output, MODBUS protocol
Turbidity Sensor	Interface	With waterproof connector
	Principle	90° diffuse light
	Range	0-1000 NTU
	Accuracy	±5% or ±0.3 NTU (whichever is greater)
	Resolution	0.01 NTU
	Material	Titanium alloy
	Output	RS485 output, MODBUS protocol
Digital pH Sensor	Interface	With waterproof connector
	Principle	Electrode method
	Range	0-14pH
	Accuracy	±0.02
	Resolution	0.01
	Material	POM＋titanium alloy
	Output	RS485 output, MODBUS protocol
Chlorophyll sensor	Interface	With waterproof connector
	Principle	Fluorescence method
	Range	0~400 µg/L or 0~100RFU
	Accuracy	±5% or 0.5μg/L, whichever is greater
	Resolution	0.01 µg/L
	Material	Titanium alloy
	Output	RS485 output, MODBUS protocol
Blue-green algae sensor	Interface	With waterproof connector
	Principle	Fluorescence method
	Range	0-200,000 cells/mL
	Detection Limit	300 cells/mL
	Linearity	R²>0.999
	Resolution	1 cells/mL
	Material	Titanium alloy
	Output	RS485 output, MODBUS protocol
Digital ORP Sensor	Interface	With waterproof connector
	Principle	Electrode method
	Range	-999~999mV
	Accuracy	±20mV
	Resolution	0.01mV
	Material	POM＋titanium alloy
	Output	RS485 output, MODBUS protocol
Oil in water sensor	Interface	With waterproof connector
	Principle	Fluorescence method
	Range	0-50ppm
	Resolution	0.01ppm
	Linearity	R²>0.999
	Material	Titanium alloy
	Output	RS485 output, MODBUS protocol

FAQ

Q: How can I get the quotation?

A: You can send the inquiry on Alibaba or the below contact information, you will get the reply at once.

Q: What's the main characteristics of this sensor?

1. All calibration parameters are stored in the sensor, and each probe is equipped with a waterproof connector for easy plug-in and replacement;

2. Equipped with an automatic cleaning device, it can effectively clean the measuring end face, scrape bubbles, prevent microbial attachment, and reduce maintenance;

3. Dissolved oxygen, conductivity (salinity), turbidity, pH, ORP, chlorophyll, blue-green algae and oil in water sensors can be freely matched;

4. All-in-one structural design, six probes can be connected at the same time to measure seven parameters.

Q:Could I get samples?

A:Yes,we have materials in stock to help you to get the samples as soon as we can.

Q: What’s the common power supply and signal output?

A: Common power supply and signal output is DC: 12-24V, RS485. The other demand can be custom made.

Q: How can I collect data?

A: You can use your own data logger or wireless transmission module if you have , we supply the RS485-Mudbus communication protocol.We can also supply the matched LORA/LORANWAN/GPRS/4G wireless module.

Q: Do you have the matched software?

A:Yes, we can supply the software , you can check the data in real time and download the data from the software, but it need use our data collector and host.

Q: What’s the standard cable length?

A: Its standard length is 5m. But it can be customized, MAX can be 1km.

Q: What's the lifetime of this Sensor?

A: Usually 1-2 years.

Q: May I know your warranty?

A: Yes, usually it’s 1 year.

Q:What’s the delivery time?

A: Usually, the goods will delivered be in 3-5 working days after receiving your payment. But it depends on your quantity.

Just send us an inquiry at the bottom or contact Marvin for more information, or get the latest catalog and competitive quotation.

Previous: 2025 New Robot Lawn Mower GPS Navigation Self-Propelled Automatic Recharge Smart Robotic Lawn Mower for Garden Grass Cutter

Next: Titanium Alloy Corrosion Resistant Digital Four-Electrode Water Conductivity Temper TDS Salinity Sensor for Seawater Monitoring

aquaculture Dissolved Oxygen Meter