Corrosion Resistant Cost-effective Soil PH Sensor
Video
Product Features
1. Corrosion-resistant Solid AgCl electrodes
Compared with the traditional alloy electrode, the AgCl reference electrode used in this sensor, corrosion resistance.
2. Easy measurement
Soil PH testing is no longer limited to laboratories and professionals, and can be measured by inserting into the soil.
3. High precise with
Using high precise AgCl probes with three points calibration which can keep in high precise, error can be within 0.02.
4. With temperature compensation and also can measure soil temperature value
The PH sensor has temperature compensation inside, which can realize the pH value stabilization within a certain temperature range.
5. Low measurement cost
Compared with traditional laboratory measurement, this product has low cost, fewer steps, no reagents required, and unlimited testing times.
6. More application scenarios
Not only can it be used in the soil, but it can also be used in hydroponics, aquaculture, etc.
7. High precision, fast response, good interchangeability, probe plug-in design to ensure accurate measurement and reliable performance.
Product Applications
The sensor is suitable for soil monitoring, scientific experiments, water-saving irrigation, greenhouses, flowers and vegetables, grassland pastures, soil rapid testing, plant cultivation, sewage treatment, precision agriculture and other occasions.
Product Parameters
| Product Name | Soil PH and temperature 2 in 1 sensor |
| Probe type | AgCl Anti-corrosion reference probe |
| Measurement parameters | Soil PH Value; Soil temperature value |
| Measuring range | 3 ~ 10 PH; -40℃～85℃ |
| Measurement accuracy | ±0.2PH; ±0.4℃ |
| Resolution | 0.1 PH; 0.1℃ |
| Outputsignal | A:RS485 (standard Modbus-RTU protocol, device default address: 01) B:4 to 20 mA (current loop) C:0-5V /0-10V |
| Output signal with wireless | A:LORA/LORAWAN B:GPRS C:WIFI D:NB-IOT |
| Software | Can send the free server and software to see the real time data and download the history data in the PC or mobile end with our wireless module |
| Supply voltage | 2～5VDC /5-24VDC |
| Working temperature range | -30 ° C ~ 70 ° C |
| Calibration | Three points calibration |
| Sealing material | ABS engineering plastic, epoxy resin |
| Waterproof grade | IP68 |
| Cable specification | Standard 2 meters (can be customized for other cable lengths, upto 1200 meters) |
Product Usage
Soil Surface measure method
1. Select a representative soil environment to clean up surface debris and vegetation.
2. Insert the sensor vertically and completely into the soil.
3. If there is a hard object, the measurement location should be replaced and re-measured.
4. For accurate data, it is recommended to measure multiple times and take the average.
Buried measure method
1. Make a soil profile in the vertical direction, slightly deeper than the installation depth of the bottommost sensor, between 20cm and 50cm in diameter.
2. Insert the sensor horizontally into the soil profile.
3. After the installation is completed, the excavated soil is backfilled in order, layered and compacted, and horizontal installation is guaranteed.
4. If you have the conditions, you can put the removed soil in a bag and number it to keep the soil moisture unchanged, and backfill it in reverse order.
Six-tier installation
Three-tier installation
Measure Notes
1. The sensor needs to be used in 20% -25% soil humidity environment.
2. All probe must be inserted into the soil during measurement.
3. Avoid excessive temperature caused by direct sunlight on the sensor. Pay attention to lightning protection in the field.
4. Do not pull the sensor lead wire with force, do not hit or violently hit the sensor.
5. The protection grade of the sensor is IP68, which can soak the entire sensor in water.
6. Due to the presence of radio frequency electromagnetic radiation in the air, it should not be energized in the air for a long time.
Product advantages
Advantage 1:
Send the test kits totally free
Advantage 2:
Terminal end with the Screen and the Datalogger with SD card can be customizable.
Advantage 3:
The LORA/ LORAWAN/ GPRS /4G /WIFI wireless module can be customizable.
Advantage 4:
Supply the matched cloud server and software to see real time data in PC or Mobile
FAQ
Q: What's the main characteristics of this soil PH sensor?
A: It is using AgCl solid reference electrode with small size and high precision,good sealing with IP68 waterproof, also can measure the soil temperature , it can totally burried in the soil for the 7/24 continuous monitoring.
Q: Could I get samples?
A:Yes,we have materials in stock to help you to get the samples as soon as we can.
Q: What’s the common power supply ?
A: 2～5VDC /5-24VDC
Q: Can we test it in the PC end?
A: Yes, we will send you a free RS485-USB convertor and the free serial test software which you can test it in your PC end.
Q: How to keep the high precise in the long term using?
A:We have updated the algorithm at the chip level. When errors occur during long-term use, three points calibration can be made through MODBUS instructions to ensure product accuracy.
Q: Can we have the screen and the datalogger?
A: Yes, we can match the screen type and data logger which you can see the data in the screen or download the data from the U disk to your PC end in excel or test file.
Q: Can you supply the software to see the realtime data and download the history data?
A: We can supply the wireless transmission module including the 4G,WIFI,GPRS , if you use our wireless modules, we can supply the free server and free software which you can see the realtime data and download the history data in the software directly.
Q: What's the standard cable length?
A: Its standard length is 2m. But it can be customized, MAX can be 1200 meters.
Q: What's the lifetime of this Sensor?
A: At least 2 years or more.
Q: May I know your warranty?
A: Yes, usually it’s 1 year.
Q: What's the delivery time?
A: Usually, the goods will be deliveried in 1-3 working days after receiving your payment. But it depends on your quantity.
